Need Technical Information or a Quotation?

Swage Nipples

Lomond Engineering has been stocking and manufacturing both concentric and eccentric swage nipples in Australia for 40 years, and is one of the core products the company was built on. Swage nipples are usually used in smaller diameter piping systems where a transition from welded to threaded connections is required, which is not possible with regular BW fittings. Swages may also be supplied with various combinations of plain, bevelled and threaded ends. There are two dimensional standards for Swages, MSS-SP-95 and BS3799 with the major difference being the length of the swage nipple in some smaller sizes. Lomond has extensive experience with this product range and welcome your enquiries.

We are also able to produce smooth transition eccentric swages where large reductions may cause vortexing and short life-spans due to the flow characteristics.

Swage Nipple Standards

ASTM A234-WPB
ASTM A105-N
ASTM A420-WPL6
ASTM A350-LF2
ASTM A403-WP316/L
ASTM A403-WP304/L
ASTM A182-F51/F53
ASTM A182-F5/F11/F22/F91
MSS-SP95
BS3799
NACE MR0175/MR0103

Piping Component Manufacturer - Lomond Engineering

Swage Nipples

Lomond Engineering has been stocking and manufacturing both concentric and eccentric swage nipples in Australia for 40 years, and is one of the core products the company was built on. Swage nipples are usually used in smaller diameter piping systems where a transition from welded to threaded connections is required, which is not possible with regular BW fittings. Swage may also be supplied with various combinations of plain, bevelled and threaded ends. There are two dimensional standards for Swages, MSS-SP-95 and BS3799 with the major difference being the length of the swage nipple in some smaller sizes. Lomond has extensive experience with this product range and welcome your enquiries.

We are also able to produce smooth transition eccentric swages where large reductions may cause vortexing and short life-spans due to the flow characteristics.

Swage Nipple Standards

ASTM A234-WPB
ASTM A105-N
ASTM A420-WPL6
ASTM A350-LF2
ASTM A403-WP316/L
ASTM A403-WP304/L
ASTM A182-F51/F53
ASTM A182-F5/F11/F22/F91
MSS-SP95
BS3799
NACE MR0175/MR0103

Swage Nipples

Lomond Engineering has been stocking and manufacturing both concentric and eccentric swage nipples in Australia for 40 years, and is one of the core products the company was built on. Swage nipples are usually used in smaller diameter piping systems where a transition from welded to threaded connections is required, which is not possible with regular BW fittings. Swages may also be supplied with various combinations of plain, bevelled and threaded ends. There are two dimensional standards for Swages, MSS-SP-95 and BS3799 with the major difference being the length of the swage nipple in some smaller sizes. Lomond has extensive experience with this product range and welcome your enquiries.

We are also able to produce smooth transition eccentric swages where large reductions may cause vortexing and short life-spans due to the flow characteristics.

Swage Nipple Standards

ASTM A234-WPB
ASTM A105-N
ASTM A420-WPL6
ASTM A350-LF2
ASTM A403-WP316/L
ASTM A403-WP304/L
ASTM A182-F51/F53
ASTM A182-F5/F11/F22/F91
MSS-SP95
BS3799
NACE MR0175/MR0103

Swage Nipples

Lomond Engineering has been stocking and manufacturing both concentric and eccentric swage nipples in Australia for 40 years, and is one of the core products the company was built on. Swage nipples are usually used in smaller diameter piping systems where a transition from welded to threaded connections is required, which is not possible with regular BW fittings. Swages may also be supplied with various combinations of plain, bevelled and threaded ends. There are two dimensional standards for Swages, MSS-SP-95 and BS3799 with the major difference being the length of the swage nipple in some smaller sizes. Lomond has extensive experience with this product range and welcome your enquiries.

We are also able to produce smooth transition eccentric swages where large reductions may cause vortexing and short life-spans due to the flow characteristics.

Our large inventory of Carbon, Low-Temp, 316/L and 304/L Swage Nipples is supplemented by raw material in most Austenitic, Chrome Moly, Duplex and Super Duplex grades, enabling Lomond to produce virtually any end, size and grade combination required.

Swage Nipple Standards